Evaluation of thermodynamic simulation (FactSage) for the interpretation of the presence of phases and the firing behavior of triaxial ceramics

The present work provides an evaluation of the thermodynamic calculation, using the FactSage software, which allows the study of the interaction of a system of various oxides. It started with the examination of the crystalline phases present in the raw materials indicated by the FactSage and compared with the analysis by XRD. Subsequently, the crystalline phases and the amount of liquid phase predicted by the software at different firing temperatures were analyzed. These results were compared with experimental data and records from the literature. The FactSage showed consistent results, managing to indicate the presence of the main phases in the raw materials; however, the actual and predicted secondary phases did not always coincide. The type of phase in the firing was correctly indicated, tridymite (stable phase above 867 °C), mullite and liquid phase, but their quantity in relation to the firing temperature was quite different from the experimental data.     

Phosphorylated cellulose/electrospun chitosan nanofibers media for removal of heavy metals from aqueous solutions

Contamination of water resources by toxic heavy metals has significant impacts on environmental and human health. Their removal from aqueous media is essential to ensure water sustainability and to provide safe freshwater availability to population. Electrospun chitosan (CS) nonwoven mats are efficient at removing heavy metals from aqueous media. However, they suffer from low permeability and low-mechanical strength. They are also unable to remove contaminants in a nonselective way. A bilayer sorbent media made of a porous phosphorylated cellulose substrate covered by electrospun CS nanofibers was developed to overcome those weaknesses. The hydrophilic composite shows good water permeability and mechanical strength with appropriate thermal and chemical characteristics. Adsorption tests with Cd(II) indicate that pseudo-second order and Langmuir models best fitted experimental data, with a maximum adsorption capacity of 591 mg/g at 25°C. Adsorption with multielement samples containing Cr(VI), Cu(II), Cd(II), and Pb(II) also reveal their capability to remove them in a selective way. This mechanically resistant, hydrophilic, and permeable adsorbent media was able to capture both cationic and anionic metallic contaminants.     

Study of the impact of reactants utilization on the performance of PEMFC commercial stacks by impedance spectroscopy

Reactants utilization is a key stake for a PEMFC system: a too low utilization leads to a waste of reactant but a too high utilization may result in a detrimental starvation. To study these impacts, two commercial stacks were characterised by impedance spectroscopy under different hydrogen and oxygen utilizations (from nominal conditions to quasi-starvation). One was fresh while the other was operated on-field during 10,000 h. This study shows that the two capacitive loops in the lowest frequency range (1 Hz and below) correspond respectively to oxygen and hydrogen mass transfer limitations: the limiting reactant can be clearly identified from the impacted frequencies. The size of these loops was increased by up to 30% when the cell operated at high reactant utilizations. These results could therefore pave the way to the development of algorithms able to estimate the degree of starvation of some cells.     

Investigation of functional core-rim composite part production by inserted powder injection moulding

In this study, the use of Cu and Ni interlayers have been investigated for functional core-rim composite part production with WC-Co 9?wt-% feedstock/steel. For this purpose, different experiments have been performed and joining condition, shear strength and microstructure of the intermediate region have been examined. It has been found that AISI 4340 insert/WC-Co have been joined and 85.8?MPa shear strength achieved, but high speed steel insert has not joined. Moreover, it has been determined that better results are obtained with Ni interlayer. Under the same conditions, when the 40?µm Ni interlayer has been used between AISI 4340 core and WC-Co rim, shear strength has been increased approximately twice and has been 162.7?MPa.     

Post-fire behavior of CFRP retrofitted thin-walled steel tanks

Thin-walled shell structures are characterized by a lightweight structural form with high strength. This structure has many applications in various engineering fields and is considered to be a basic tool in the modern industry. This study investigates the effect of CFRP on tanks after post-fire in order to examine the buckling and post-buckling of the cylindrical tanks. Herein, post-fire was introduced at different temperatures (150°C-600°C). Ten laboratory specimens in two groups with verified temperatures, under external pressure, are examined. The models were designed to demonstrate how repairing steel tanks, which are damaged by fire, by using carbon-fiber-reinforced polymer can recover lost capacity. The results of testing under different theories and codes were compared. This study shows that the initial buckling load of the temperature group increased by 30.82% to 57.09% compared to the temperature without-CFRP group. The overall buckling load of the temperature group increased by 37.01% to 67.74% compared to the temperature without-CFRP group. The collapse load of the temperature group increased by 27.04% to 52.64% compared to the temperature without-CFRP group. And using carbon-fiber-reinforced polymer on models, which are damaged by fire, can be an improvement behavior for the buckling and post-buckling specimen tests.